A-Neuvideo HD-44G Instruction Manual - page 17
EDID FUNCTION
EDID FUNCTION : LEARNING
Learning EDID Single to Single
Example : Learn Destination #4 EDID To Source #3.
Step 1.
Press the EDID button
The button will fl ash blue and the display will show the current Embedded EDID
Status.
Step 2.
Press the Destination #4 button row
Copy the Destination #4 Display EDID.
Step 3
.
Press the Source #3 button row
Learning the Destination #4 EDID To Source # 3.
Step 4.
Press ENTER button
To confi rm entries.
Learning EDID Single to multiple
Learning destination EDID link to the majority Sources
Step 1.
Press the EDID button
The button will fl ash blue and the display will show the current Embedded EDID
Status.
Step 2.
Press the Destinations #1~4 button row
Copy any 1~4 Destinations EDID.
Step 3.
Press the Source #1, #3, #4 button row
Learning the Destination EDID link to source #1, #3, #4.
Step 4.
Press ENTER button
To confi rm entries.
Learning EDID Single to ALL
Learning destination EDID link to All Sources
Step 1.
Press the EDID button
The button will fl ash blue and the display will show the current Embedded EDID
Status.
Step 2.
Press destination button 1 thru 4
Learning anyone 1~4 Destination EDID to all sources.
Step 3.
Press ALL button
Learning selected destination EDID to all sources.
Step 4.
Press ENTER button
To confi rm entries.
EDID status
To view the current EDID status.
Step 1.
Press the EDID button
The button will fl ash blue and the display will show the current Embedded EDID
Status.
Step 2.
Press the EDID button
To exit.
How to setup FSS
®
Function
Fast speed start
®
Step 1.
Press the Destination #1~4 button row
Then Press the Source #1~4 button row
To setup and Install all devices.
Step 2.
Press the EDID button
Select a optimum status of Embedded EDID mode.
Step 3.
Press ENTER button
To conform entries.
Step 4.
Press the EDID button
To select the EDID FSS
®
mode.
Step 5.
Press ENTER button
To conform entries.
LEARNING EDID defi nition
Learning EDID from Destination to Source
1. Switcher will LEARN destination EDID and pass the selected source.
2. To set up learning between a single destination and single source:
Press EDID button > Press Destination 1 thru 4 > Press Source 1 thru 4 > Press ENTER to confi rm.
Switcher will learn destination EDID to source device.
3. To set up learning between a single destination and Multiple sources:
Press EDID button > Press Destination 1 thru 4 > Press the majority Sources 1 thru 4 > Press ENTER.
Switcher will learn single destination EDID to many source devices.
4. How to Learning single destinations with all sources. Press EDID button > Press ALL button > Press ENTER to confi rm.
15