A-TOUCH W-Thermo Instruction Manual - Configuration
info@a-touch.in.th www.a-touch.in.th
The A-TOUCH thermostat is a unit that the following basic features:
-
selectable cycle for summer (cooling) and winter (heating)
-
programmable temperature schedule independent for winter and summer
-
temperature scheduling with 3 ON periods for each day of the week
-
programmable Minimum and Maximum temperature
-
possibility to operate with different types of climatization units
-
possibility to use it to drive 2 different climatization machines (1 thermostat
for 2 actuators)
Some more features are available but they will be explained in the chapter
Advanced Settings.
Configuration
The unit allows a number of configurations so that it works as you wish. These
configurations need to be made only once.
The configurations are made in MENU mode. The MENU can be accessed only if the
unit is completely OFF:
- if the display does not show the time or --:--, hold the key
(STBY) for more than 1 second:
o
the unit will switch off and the display will show the time.
The MENU is accessed by pressing then the key (VENT). The menu steps are:
to select if the schedule should run or not
to adjust the thermostat for Winter or Summer operation
to adjust the minimum temperature of the house
to adjust the maximum temperature of the house
to adjust date and time
to define the winter program
to define the summer program
to define the unit for heating
to define the unit for cooling
to define the unit type
In the menu mode, the keys have the following operation:
key
BACK
key
UP
key
DOWN
key
ENTER
CYCLE
SELECT
MINIMUM
TEMPERATURE
MAXIMUM
TEMPERATURE
DATE TIM
ADJUST
WINTER
PROGRAM
SUMMER
PROGRAM
HEATER
SELECT UNIT
COOLER
SELECT UNIT
UNIT TYP
SELECT
23.1º
--:--
SCHEDULE
SELECT