A-TOUCH W-Thermo Instruction Manual - page 6
info@a-touch.in.th www.a-touch.in.th
Confirm by pressing key (ENTER):
- now you can adjust the starting hours of the first period.
Change with key (UP) or (DOWN)
Confirm by pressing key (ENTER):
- now you can adjust the finishing hours of the first period.
Change with key (UP) or (DOWN)
Confirm by pressing key (ENTER):
- now you can adjust the temperature of the first period.
Change with key (UP) or (DOWN)
Confirm by pressing key (ENTER):
- now you can adjust the starting hours of the second period.
Repeat the same procedure for periods 2 and 3. Once you confirm the temperature
of the third period, you go to the week day Tuesday menu:
- the display shows the week day Tuesday. You can select another
day if you like by pressing key (UP) or (DOWN).
Confirm by pressing key (ENTER):
- now you can choose between copying the previous week day
settings or edit this day. To edit this day press key (DOWN):
- the display shows EDIT. Now press key (ENTER):
- the display shows the settings for the first period. The procedure is
as explained for Monday. Once you confirm the temperature of the
third period, the display shows the next week day.
Confirm by pressing key (ENTER):
- now you can choose between copying the previous week day
settings or edit this day. If you wish to copy just press key
(ENTER):
- the settings are copied and you can edit the next day.
Repeat the procedure for every week day. When you reach Sunday and confirm the
last setting, then you will access the Summer Program menu. The procedure is
exactly the same as for the winter program.
Notes:
-
If the starting hours of one period are the same as the stopping hours then
the period does not work (unit is off).
-
You can define one period as 0 to 24 hours: this will work the whole day.
-
Periods can overlap: in winter mode the highest temperature prevails, in
summer mode the lowest temperature prevails.
-
It is not mandatory that you define all the operation periods for a certain
day. However, in order for the program to be stored, you must confirm all
the 3 periods completely: just keep the start and stop times equal and the
period will not work.
When you finish defining the last week day of the summer period, the
display will show the next menu item.
SELECT HEATER AND COLLER UNIT
It is possible that one single thermostat panel controls 2 different climatization
machines. In that case, one actuator controls for example the radiating floor and
another actuator controls for example the air conditioning.
The unit defined as LOCAL is the actuator that is connected to the thermostat
panel; the other unit is then the REMOTE actuator.
The REMOTE unit has to be programmed to operate as SLAVE of the LOCAL unit.
Please see the chapter USING 2 UNITS WITH 1 THERMOSTAT for more details.
06-00H20
1 START
06-06H20
1 STOP
06-09H20
1 STOP
06-09H20
1 TEMP.
06-09H22
1 TEMP.
00-00H20
2 START
TUESDAY
WEEK DAY
COPY
EDIT
00-00H20
1 START
06-09H22
3 TEMP.
WEDNESD
WEEK DAY
COPY
WEDNESD
WEEK DAY
HEATER
SELECT UNIT