AB IPBox 9000HD Manual - page 12
12
Connection of HD (High Definition) signal:
If you dispose of TV or other type of displey that supports High Definition resolution (marked as “HD ready” or
“Full HD”) connect your STB with this display via HDMI connector. Using such a connection the video and
audio signal is transferred digitally in best.
You can also use Component analog YPbPr output for transfering video signal. Audio must be connected
separatelly via CINCH L/R connectors (analog – just stereo) or via optical digital S/PDIF output.
Connection of SD (Standard Definition) signal:
If you want to connect your STB with SD (Standard Definition) TV display you can use HDMI or YPbPr
connectors if your TV is equipped with it (signal will be transfered in SD - 576i resolution).
You can also use other types of connections (ordered downward according to quality): TV SCART in RGB or
YUV mode, S-Video (Y/C), CINCH (CVBS), TV SCART (CVBS). None of these connection supports High
Definition output. If you receive HD signal and you use some of these connections finalreceived signal will be
just in SD quality.
Audio signal can be connected via:
- analog stereo outputs: TV SCART(L,R), CINCH(L,R)
- digital outputs: HDMI or S/PDIF