AB IPBox 9000HD Manual - page 35
35
Example for direct connection:
Receiver (1) :
IP Adress
192.168.1.20
Subnet
Mask 255.255.255.0
Gateway
192.168.1.135
Receiver (2) or PC :
IP Adress
192.168.1.21
Subnet
Mask 255.255.255.0
Gateway
192.168.1.135
13.2. AUTO (DHCP)
For the VDSL or ICS client users.
It detects values automatically. No need to enter any values here. After selecting Auto(DHCP), press submit
button to have all settings show up automatically. If LAN cable is not properly connected, all settings might
appear as “0.0.0.0.” In this case, check the cable connection and retry it.
13.3. AUTO (PPPoE)
For the ADSL users
ID and Password (which acquired from internet service provider) are required here; enter the values by using
virtual Keyboard. Press OK button to bring the Virtual Key board.
13.4. AUTO (PPP)
For the Dial up MODEM users
ID and Password (which acquired from internet service provider) are required here; enter the values by using
virtual Keyboard. Press OK button to bring the Virtual Key board.