Abatron BDI2000 User Manual - page 23
bdi
NDI
JTAG debug interface for EDGE Debugger, BDI2000 (PPC6xx/7xx/82xx/83xx)
User Manual 23
© Copyright 1992-2007 by ABATRON AG
V 1.01
6 Telnet Interface
A Telnet server is integrated within the BDI that can be accessed when the BDI is connected via eth-
ernet to the host. It may help to invertigate problems and allows access to target resources that can
not directly be accessed by the debugger.
The following commands are available:
"MD [
] ["MDD [
] ["MDH [
] ["MDB [
] ["MM
"MMD
"MMH
"MMB
"MC [
] ["MV verifies the last calculated checksum",
"RD display general purpose registers",
"RDSPR
"RDSR
"RDVR [
"RM
"RMSPR
"RMSR
"RMVR
"DCACHE
"DTLB
"ITLB
"L2CACHE
"UPMR
"BOOT reset the BDI and reload the configuration",
"RESET reset the target system",
"GO [
"TI [
"TC [
"HALT force target to enter debug mode",
"BI
"CI [
"BD [R|W]
"CD [
"INFO display information about the current state",
"DCMD
"HELP display command list",
"QUIT terminate the Telnet session"