ABB 266FF Operating Instructions Manual - page 10
10 OI/266/FF-EN Rev. B
| 2600T Series Pressure transmitters
4 Opening the box
Figure 3: Product identification
Local keys below label
PRODUCT CODE
SEAL-H
SEAL-L
SPEC.REQUEST
LRL/URL
SPAN LIMITS
POWER SUPPLY
OUTPUT SIGNAL
ABB S.p.A.
Made in Italy
TS
PS
SERIAL\NUMBER
SENSOR DIAPH.-FILL
FLANGE/CONN.-GASKET/S
H DIAPH.-FILL
L DIAPH.-FILL
SEAL
HW Rev.
MD:
PED:
MWP/OVP
IS/Sec. Intrinseque (Entity) CL I, ZONE 0 AEx/Ex ia IIC T6,T5,T4
CL I/DIV1/GP ABCD IS - CL II/DIV1/GP EFG - CLIII DIV1 when
conn. per dwg DH 3173 ENCL 4X "FISCO Field Instrument"-"DUAL SEAL"
II 1 G Ex ia IIC T6 - II 1/2 G Ex ia IIC T6 -
II 1 D Ex iaD 20 T85°C and II 1/2 D Ex iaD 21 T85°C
for electrical parameters see cert. FM09ATEX0024X
IP67 - IECEx FME09.0003X "FISCO Field Instrument"
II 3 G Ex nL IIC T6 - II 3 D Ex tD A22 IP67 T85°C
Ui = 42Vdc Ii
for electrical parameters see cert. FM09ATEX0025X
IECEx FME09.0004X "FNICO Field Instrument"
General Purpose IP67 Max.Supply Voltage 42 Vdc
XP (US) CL I/DIV1/GP ABCD, DIP CL II, III /DIV1/GP EFG,
XP (Canada) CL I/DIV1/GP BCD, DIP CL II, III /DIV1/GP EFG,
CL I, ZONE 1, AEx/Ex d IIC T4 -50°C ENCL 4X T AMB=85°C "Seal not required" - "DUAL SEAL" ABB S.p.A. Lenno (Co) Italy 0474 0722 APPROVED FM II 1/2 G Ex d IIC T6 - II 1/2 D Ex tD A21 IP67 T85°C FM09ATEX0023X - IECEx FME09.0002X (-50°C C US CL I, ZONE 2 AEx nC IIC T6,T5,T4 CL I, ZONE 2 Ex nL IIC T6,T5,T4 CL I/DIV2/GP ABCD NIFW when connected per drawing DH 3173 ENCL 4X "FNICO Field Instrument" - "DUAL SEAL" APPROVED FM C US APPROVED FM C US A B C 2600T Tag Number Calib. Range PRESSURE TRANSMITTER 4. Opening the box 4.1 Identification The instrument is identified by the data plates shown in Figure 3. The certification plate (ref. A): contains the certification related parameters for use in Hazardous area. The Nameplate (ref.B) provides information concerning the model code, maximum working pressure, range and span limits, power supply , output signal, diaphragms material, fill fluid, range limit, serial number, maximum process working pressure (PS) and temperature (TS). Please refer to the serial number when making enquiries to ABB service department. The optional additional SST Tag plate (ref. C - code I2) also provides customer tag number and calibrated range. The instrument may be used as a pressure accessory (category III) as defined by the Pressure Equipment Directive 97/23/EC. In this case, near the CE mark, you will find the number of the notified body (0474) that have verified the compliance. 266 pressure transmitters are in compliance with EMC 2004/108/CE*. The certification plate (ref.A) shown here is issued by ABB S.p.A, 22016 Lenno, Italy, with the numbers: — FM09ATEX0023X or IECEx FME 09.0002X (Ex d) — FM09ATEX0024X or IECEx FME 09.0003X (Ex ia) — FM09ATEX0025X or IECEx FME 09.0004X (Ex nL) CE-Identification number of the notified bodies to Pressure Equipment Directive: 0474, to ATEX certification: 0722, to IECEx certification: IT/CES/QAR07.0001/02. The certification plate (ref.A) shown here may also be issued for ABB-APR, 32425 Minden, Germany, with the numbers: — FM09ATEX0068X or IECEx FME 09.0002X (Ex d) — FM09ATEX0069X or IECEx FME 09.0003X (Ex ia) — FM09ATEX0070X or IECEx FME 09.0004X (Ex nL) CE-Identification number of the notified bodies to Pressure Equipment Directive: 0045, to ATEX certification: 0044, to IECEx certification: DE/TUN/QAR06.0012/01. The same certification plate (ref.A) can be issued for ABB India Limited, 560058 Bangalore, India, with the numbers: — FM11ATEX0035X (Ex ia) — FM11ATEX0036X (Ex d) — FM11ATEX0037X (Ex nL) CE-Identification number of the notified bodies to ATEX certification: 1725. ABB Engineering Limited, Shanghai 201319, P.R. China, can issue this certification plate (ref. A), as well. The numbers are: — FM11ATEX0046X or IECEx FMG 11.0019X (Ex ia) — FM11ATEX0047X or IECEx FMG 11.0018X (Ex d) — FM11ATEX0048X or IECEx FMG 11.0020X (Ex nL) CE-Identification number of the notified bodies to ATEX certification: 1725. * C and F sensors on gauge and absolute pressure transmitters are in compliance with IEC61000-4-6 with B criteria