ABB 266FF Operating Instructions Manual - page 39
2600T Series Pressure transmitters |
OI/266/FF-EN Rev. B 39
10 HMI local indicator
The keys (1), (4), (2) and (3) are available for the
menu-controlled configuration.
— The menu/submenu name is displayed above in the LCD
display.
— The number/line of the currently selected menu item is
displayed in the upper right of the LCD display.
— A scroll bar is located on the right edge of the LCD display
which shows the relative position of the currently selected
menu item within the menu.
— Both of the keys (1) and (4) can have various functions.
The meaning of these buttons is displayed below in the
LCD display above the respective button.
— You can browse through the menu or select a number
within a parameter value using both keys (2) and (3). The
button (4) selects the desired menu item.
Button (1) functionalities
Meaning
Exit
Exit menu
Back
Back one submenu
Cancel
Exit without saving the selected parameter
value
Next
Select next position for entering numerical
values or letters
Button (4) functionalities
Meaning
Select
Select submenu/parameter
Edit
Edit parameter
Ok
Save selected parameter and display
stored parameter value
10.15 HMI menu structure
The HMI menu is divided in the following sections which can be
selected by scrolling them acting on the central buttons (2) or (3),
once on the display the desired sub-menu icon will be visualized,
confirm your selection with the [Select] button.
Follow the instruction on the screen to perform the configuration
of the different parameters.
This menu allows the set-up of different functions relevant to
the display itself. The menu driven structure will guide you
through the choice of some functional aspects as the display
language and contrast. Moreover, it is possible to choose in
details what you want to see on the display: one or two lines
with or without bargraph. Inside this menu there is the
possibility of setting a protection password (security) and the
display scaling (linearization type, unit, LRV, URV). Display
revision number available under this structured menu.
This menu gives you all information about the device. The
menu driven structure will show you what is the sensor type,
the hardware and software revisions, the high and low sensor
limits as well as the minimum applicable span.
The last section of this structured and driven menu gives you
the possibility of changing the Tag, the Address and the Ident
Number of the device.