ABB C1900 Series Installation Manual - page 4
2
COMMANDER 1900
single pen recorder
Electrical code – standard
Option module – none
Options – none
Door lock – not fitted
Power supply – 115V AC
Modules fitted in module positions 2 to 6 – none
Special Settings – company standard
1901J A 0 0 1 1 00000 STD
Push to
release handle
Pull handle
to release
door...
1
2
Check code number against
the Specification Sheet –
SS/C1900R or SS/C1900RC
Loosen
captive screw
...and open door
Swing chart plate forward
3
4
5
6
2.1
Accessories – Fig. 2.1
2.2
Checking the Code Number – Fig. 2.2
2.2.1
Non-upgradeable Version
Note. The 1901J is a basic, non-upgradeable single
pen recorder. This version is not fitted with an analog
output, relay, transmitter power supply unit or digital
inputs and no additional modules can be fitted. The full
identification code is shown below.
Fig. 2.2 Checking the Code Number
A – Standard Accessories
B – Optional Accessories
Case-to-Panel Gasket
C1900/0149
(see
Note
below)
Pen Capsule
1 to 4
(depending on
no. of channels)
Charts
(Pack of 3)
Keys
(door lock versions only)
Wall-mounting Kit
C1900/1712
(kit contains 2 sets
of items shown)
Pipe-mounting Kit
C1900/1713
(kit contains 4 sets
of items shown)
Note. If panel-mounting to NEMA 4X standard is
required, a continuous bead of suitable silicon
sealant must be applied between the case flange
and the panel. Do not use the optional gasket.
Fig. 2.1 Accessories
2
PREPARATION