ABB SACE Emax 2 Installation, Operation And Maintenance Instructions - page 26
Other manuals for SACE Emax 2:
Installation, Operation And Maintenance Instructions For The Installer And The User
Manual is about: low voltage air circuit-breakers
of
108
ABB | SACE Emax 2
24 | © 2014
ABB |
1SDH000999R0002 - L8569
Emax E1.2 circuit-breakers | 6 - Installation
Mounting the fixed part of the
withdrawable circuit-breaker.
Fix the fixed part to a horizontal surface using four M8 x 25 screws (see Figure 44). Tighten the screws with
tightening torque = 21 Nm - 186 lb.in.
Figure 44
Types of terminal
The following are the different types of terminal:
Figure 45 - F - HR - Horizontal rear IEC
Figure 46 - F - VR - Vertical rear IEC
Figure 47 - F - F - Front IEC-UL
Figure 48 - F - EF - Extended front IEC-UL
Continued on the next page