ABB VersaRupter Installation, Operation And Maintanance Manual - page 3
VersaRupter MV Indoor Switch | Installation and Operation Manual
3
Table of Contents
Introduction
5
Installation and Mounting
6
Mounting and Wiring the Shunt Trip
10
Mounting the Open Fuse Auxiliary Switch
12
Mounting the Open Fuse Auxiliary Switch on Motor Bracket
14
Mounting an Open Fuse Auxiliary Switch with a Shunt Trip
16
Mounting the Auxiliary Switch
19
Installing the Left Hand Shaft Extension
20
Mounting the NM Motor Operator on K-Mechanism
21
Mounting the NM Motor Operator on A-Mechanism
23
Mounting the NM Motor Operator on Left Side of VersaRupter A-mech
25
Mounting the NM Motor Operator on Left Side of VersaRupter K-mech
26
Installing the Type E Ground Switch on VersaRupter
27
Installing the Type E Ground Switch on VersaRupter Fuse Base
28
Installing the Mechanical Interlock
29
Installing the Bottom Mounted Fuse Base with Fuse Tripping
31
Installing the Top Mounted Fuse Base with Fuse Tripping
34
Mounting the HE/HM Operating Handles
37
Installing the Chain Drive Handle
38
Installing the Direct Drive Handle
39
Installing the Back Connect Kit
40
Installing the K-mechanism
41
Installing the A-mechanism
42
Service and Maintenance
43
Replacement of Parts 5-27 kV
45
Replacement of Parts 38 kV
53
Torque Values for Self Tapping Screws
58
Drawings
Outline
59
Back Connect Kit
69
Auxiliary Switch Kit
74
Chain Drive Assembly
75
Left Hand Shaft Extension
76
Mechanical Door Interlock
77