Abcon ProShip Instruction Manual - Weighing
8 PROSHIP
®
WEIGHING
BEFORE WEIGHING
Wheneverpossible,pleaseallowthescaletowarmupforseveralsecondsafterfirst
turning the power on so that the scale will function properly and accurately.
ERRORMESSAGES:
EEEE or Err-0
=Overload
,
Lob or LoBatt
=LowBattery
WEIGHING PROCEDURES
1. PRESS[ON/OFF]TOTURNONTHESCALE:
When the power is turned on the display will count down from “
999999” to “111111”
and then
“0” appear on the display.
2. SELECTTHEWEIGHINGUNITWITH[UNIT]:
Press
[UNIT] to select a weighing unit “kg”, “lb”.Oncetheunithasbeenselected,the
selectedunitwillbedisplayednexttotheweightvalue.
3. STARTWEIGHING:
If you do not use a container for weighing:
• Verifythereadingis
“0”. If not, press [ZERO] to display “0”.
• Placetheitemstobeweighedontheplatform.
If you use a container for weighing:
• Placeanemptycontainerontheplatform.
• Waitforthestabilityweighingtobedisplayedandpress
[ZERO].
• Placetheobjectstobeweighedinthecontainer.