AbelCine PCU2+ Owner's Manual - page 11
Video System
Press
D
to toggle through all video output
formats supported by the Phantom.
On the Flex4K
D
will open the following screen
for setting video options
Erase Mag/Storage
Playback Rate
The Phantom will normally play at the video
system frame rate. Change the playback rate
with
C
and
D
. This setting is persistent over
power cycles.
Parameters in the Advanced Menu
5
Advanced Menu
Hold
D
for five seconds to initiate erasure of
CineMag or other media.
•
Dual
Toggles between unified output (UNI)
and simultaneous Live + Playback (L/P).
•
3G
Toggles between 3G Off, 444, 60P and
4K modes.
•
Sys
Cycles through all supported video
formats compatible with the current 3G
mode.
Video Mode
Mag Format (for Flex4K only)
For cameras with two SDI outputs, press
D
to
toggle between video modes 4:2:2, dual-link
4:4:4, and 4:2:2 with simultaneous live and
playback.
HQ Mode (for Flex 2K only)
Press
D
to toggle HQ mode.
Parameters in the Advanced Menu
º LOOP L
Advanced
Mag Format:Cine Raw
10144f 33.8s
Press
D
to toggle between Raw and ProRes
recording on CineMag.
FPS Presets
Toggles frame rate presets between NTSC
(24/30 multiples) + PAL (25 multiples).
20
21