AbelCine PCU2+ Owner's Manual - page 9
A
-
PB: Toggle between Playback Mode (PLAY)
and Record Mode (LIVE).
C
-
Mode: Toggle between four record modes:
1
LOOP
records continuously to RAM,
replacing old frames with new ones as
memory is filled.
TRIG
stops recording, based on set
trigger point (see page 13 to check your
setting).
2
R/S (RUN/STOP)
Records directly to a
CineMag.
REC
begins recording, and TRIG stops
recording.
3
A.PL/R (AUTO-PLAYBACK & RECORD)
Records in Loop Mode.
TRIG
automatically plays back each clip
once, returns to Record Mode, and
erases the clip. Applicable when using an
external recorder.
4
CONT (CONTINUOUS RECORD TO MAG)
Records in Loop Mode.
TRIG auto-saves each clip to the
CineMag,
automatically returns to Record
Mode and erases the clip from RAM.
D
-
PTNS: Hold to partition RAM.
Partitioning RAM will instantly erase any
clips currently in RAM.
Other Parameters
3
Record Mode
LEFT VIEW
FRONT VIEW
RIGHT VIEW
LEFT VIEW
FRONT VIEW
RIGHT VIEW
WIRELESS
Last frame
of current clip
To review or save footage, enter Playback
Mode by toggling the ‘PB’ parameter (
A
)
from LIVE to PLAY. If the camera is already
playing back but the playback controls
aren’t visible on the PCU2+, press CTL (
B
)
.
B
-
CTL
Access playback controls
A
-
PB
Toggles between
LIVE
and
PLAY
First frame
of current clip
Marked In Point
Marked Out Point
Source of clip
(RAM or Mag)
Current frame
Clip number
4
Playback Mode
Once in Playback Mode, the first and last
frames of the current clip are displayed
on the top line. Marked frames appear
on the bottom line.
16
17
A
-
Zoom: Toggle video-out zoom state.
B
-
PA: Set frame lines (production area)
to a percentage of frame size or to certain
fixed aspect ratios.
C
-
VF/OSD: Toggle On Screen Display
for viewfinder.*
D
-
SDI/OSD: Toggle On Screen Display
for SDI output.
*
Note: For LC cameras
(with a built-in LCD screen),
C
will toggle between SDI,
LCD, and Off.
Video Output Toggles