User manual for image iqboardps interactive whiteboard interactive software not included driver software only copyright(c) 2009 a brighter image pty ltd web: www.Abimage.Com .Au or www.Iqboard.Com.Cu tel: +02 9938 6866 fax: +02 9938 6899.
Contents brief introduction ................................................................................................................. 3 1:specifications ................................................................................................................ 4 2: warning prior to inst...
Brief introduction the image iqboardps interactive ewb is the latest equipment for teaching, training and conference presentation. It incorporates the latest high-tech research results, such as top electronic technology, software technology, internet technology, etc. It will be the major instrument ...
S pecification and configuration 1. Product specification code “ps” stands for epressure sensitive technology code & the number 60, 80, 100, or 112 is the diagonal length in inches. 2. Standard package supplied: pressure sensitive iwb (model ps): # white board (1), # stylus pen (2), # wall hanging b...
- 5 - warning prior to installation z do not look directly at the projector light. Z don’t leave cables that may causing tripping . If the cables must be put on the floor, straighten and tape them to the floor using “gaffer” tape. Environment z please do not put any electrical wiring within 50cm of ...
- 9 - 2: installation and uninstall of software install interactive software note: there are 2 software programs to load. Please double click on the software in the cd supplied, and follow the instructions: a. Iqboard et&ps drivers - board drivers and calibration software b. Iq interactive software ...
- 10 - operation hints: note: the hot key buttons on the board are designed to operate with the iqsoftware and will not work when used with third party software. For best results, the following recommendations should be followed: 1. Face the whiteboard when operating and writing on the projected ima...
- 11 - pen operation: click, double click: do not move pen or finger; press the surface lightly in close quarters (1-2mm). (note: since the whiteboard and the whiteboard pen are delicate electronic products, please do not hit the surface heavily, to avoid damaging the whiteboard and the pen point) d...
Faqs 1. Indicator light does not shine if the com port of white board needs to be replaced, please contact the agent or call abi. Please contact abi. (4) indicator light doe t shine but the iwb works normal. Check the connection between usb port and com port. Then connect them. (1)the connection of ...
(1) orientation is not coorect the relative position of projector and white board has changed; pc has been replaced; software has been installed again. Do orientation again (2) the software is configured wrongly. Re-run the orientation procedure. (3) the connecting line in white board needs to be re...
Whiteboard maintenance please exit the system before cleaning and it’s preferable to exit system and standby projector so that any marks are easily seen. (note: although the whiteboard can be used with dry erase pens, it is inevitable that with age or after cleaning with abrasive cleaners, a build u...
Product service 1. Software upgrade: free updates of the software will be supplied when available. Check the website for information on the latest version. It is listed under “downloads” in the “dealer info” section (left side) of the home page www.Abimage.Com.Au. 2. Technology service: a copy of th...
