Abode G2SHO5001 User Manual - Operation
11
Operation
When you are ready to use, select the
required heat setting by turning the
temperature control in the clockwise
direction (from off to 200⁰C). The
halogen oven heats up very quickly so
pre-heating is not always necessary. The
green light illuminates until the required
temperature is reached.
Important notice: The halogen oven will not turn on until the timer has
been set. The halogen heater will turn itself on and off during
operation when the heat setting has been reached. This is to maintain
the required temperature setting. When the set cooking time has
elapsed the halogen oven will turn off.
Select the required timer setting by turning the Time control in the
clockwise direction (from 0 to 60 minutes). Once the timer has been
set the fan motor will come on.
If the temperature has also been set, this will also activate the halogen
heater.
The handle must be in the Down/On position for the halogen oven to
operate. To do this, slide the plastic piece on the handle to the unlock
position and push the handle down.
Important notice:-
the Red LED power light and halogen will not come
on until the timer has been set.