Abus RWM450 User Manual - Repeat Connection Attempts

– 45 –

Repeat Connection Attempts

First, deactivate the unit completely:

1.  Pull out red activation  

button

2.  Press and hold Test/Stop  

button 2 – 3 seconds

3.  Pull out red activation button;  

radio setup re-starts.

Extending the Existing Radio Group/

Re-entering Connection Mode

Once 10 minutes have passed during 

setup of the radio group in which some 

alarms are still in connection mode, 

these devices must be put into connec-

tion mode again if still further devices 

are to be added to the radio group:

1.  Press black activation pin into marked 

opening and hold until LED lights 

yellow; continue to hold until LED 

blinks yellow.

2. Pull activation pin back, then, for  

all alarms added to the radio  

group thus far:

LED

Signal: 

short yellow pulse  

(lights only very briefly)

Meaning:  Connection mode is acti- 

vated on all RISAs of this 

radio group 

After 5–15 seconds:

LED

Signal: 

green steady signal

Meaning:   Connection mode is acti- 

vated on all RISAs of this 

radio group

1 second

N

et

work

 setum

GB