Abus RWM450 User Manual - The Mounting Site Must Be

– 53 –

The mounting site must be 

•   firm

•   dry

•   free of dust, grease or loose paint, 

 etc.

Application:

a)  Remove the information sticker 

   and the protective film from the 

   self-adhesive surface (Fig. 3) of the 

   magnetic holder.

b)  Press the adhesive surface of the 

   magnetic holder for approx. 10 

   seconds firmly onto the mounting 

   surface.

c)  Fit the alarm unit onto the 

   magnetic holder.

d)  The adhesive bond will reach its 

   final strength after approx. 72 hours.

e)  If required, the unit can be remo- 

   ved from the magnetic holder by 

   pulling it gently vertically away

1.2   Adhesive mounting using optional 

fixing material (thin double-sided 

adhesive film) as per vfdb (German 

Fire Protection Association) 14/01 

(Q) and EN14604:2005/AC:2008 in 

addition to 1.1

The additional use of this optional 

adhesive produces an

•  extremely firm

•  and long-lasting joint between the 

  alarm unit and the fixture and thus 

  with the installation site.

•  The alarm unit cannot now be 

  removed by pulling it from the 

  magnetic holder; this means signifi- 

  cantly greater security against 

  unauthorised removal, theft etc.

Only use this method of fixing when 

you are absolutely certain that the 

unit must remain permanently fixed 

and that it should not be removed.

Fig. 3

GB