Accelerated 6200-FX User manual - page 11
11 of 14
Copyright Accelerated Concepts, Inc. © 2013
6200-FX Addendum
DHCP Prefix – the unit will use this to determine the netmask sent in a DHCP
transaction. It also uses this to setup routing to the client boxes. Default: 24
DHCP Range Start – specify the starting IP address to be given a client.
Gateway IP – the IP address to be used by the unit as its own and set the DHCP option
'router' to this value.
Secondary Gateway IP – the gateway IP will have a second default IP in the same subnet
as the wanIPv4 address, except it's xxx.xxx.xxx.1 (Disabled by default).
TCP/IP Maximum Transmission Unit -‐ TCP/IP maximum transmission unit. If specified,
all interfaces will be configured to use the specified value; otherwise they will use their
respective default settings.
DNS Options
Dynamic DNS Update URL – most Dynamic DNS services can be updated simply by
fetching a resource at a URL. You can request the NetBridge to get the page at this URL
every time it connects to the network.DNS List – enter the list of DNS servers to be used
for name resolution.
Modem Management
Radio Access Technology – this option allows you to force the WWAN link to use a
specific network type on Sierra Wireless 885/8888 modems (currently ignored for other
modems).
Syslog Options
Syslog Address – specify the IP address or name of the Syslog collector.
Log Level -‐ the unit sends syslog information for diagnosing trouble. Currently, the only
gated messages are ping statistics from the link checker. Set to >= 5 to see ping
statistics. Default: none
Syslog Addresses List – you may specify multiple IPs or domain names for where the
unit is to send it’s syslogs (at least two values must be specified). If one is unreachable,
the unit will try the next in the list. Commas must separate list of values. This overrides
the value set in the 'log' option.Port Forwarding