Accelerated 6200-FX User manual - page 6
6 of 14
Copyright Accelerated Concepts, Inc. © 2013
6200-FX Addendum
Once the new 6200-‐FX has been validated, the device will be created and added to the list of
Undeployed NetBridges.
To complete the creation of the new device you can change the default configuration that was
assigned by the organization. Clicking the Group drop down, selecting a different configuration,
and clicking Update accomplishes this. If you need to create a new configuration, you can either
create a unique configuration for the NetBridge by selecting Edit Configuration or you can
create a new group configuration by clicking Organization. This will display the configurations
available for your organization. Select New Group to add a new group configuration. Once the
group configuration is made, you can apply the new group to a NetBridge using the process
described above.
You also have the ability to associate a Site ID with the 6200-‐FX. The Accelerated Concepts
ANMS Portal also provides for manually entering the location of the device. To enter the
device’s location you must fill in the address in the Device Location section of the screen. Once
all the information is entered press Update to complete the entry. A map will automatically be
displayed of the location and the new device. The device marker on the map will indicate the
status of the device and when it was last contacted.
Using the NetBridge Commands dropdown list on the right side of the screen, you can now
manage the device. The icon panel lets you check the status of the device, update it’s
configuration, restart the device, and perform several other troubleshooting tasks.