Accupipe Wicks CM-100 Quick Reference Manual - 3. Setting The Midi Channels

WICKS

CM-100

Pipe Organ Module

Page 12

ENGLISH

The association between the VOICE MEMORY keys and the demo songs is as follows

key 

1

: Johann Gottfried Walther - Allegro 

(from Concerto in F maj.) 

key 

2

:  Johann Pachelbel - Von der Geburt Christi

key 

3

: Domenico Zipoli - Allegretto in G min 

key 

4

: Johann Gottfried Walther - Schmücke dich, o liebe Seele

key 

5

: Gio Batta Pescetti - Presto 

(from Sonata in C min.)

key 

6

: Johann Pachelbel Alle Menschen müssen sterben 

(Choral und Variation)

key 

7

: Robert Führer - Andantino in G maj

key 

8

: Johann Gottfried Walther - Erschienen ist der Herrliche Tag

3. SETTING THE MIDI CHANNELS

3. SETTING THE MIDI CHANNELS

3.1 Introduction

3.1 Introduction

Since it is a sound module, the CM-100 needs to be connected to a "controlling" or "master" instrument,

which will send it the data necessary for your performance, such as the notes to be played, the volume,

the expression and other data.  

This communication takes place by means of the MIDI protocol, a universal language for the exchange

of data between electronic musical instruments, which communicate using real "communication chan-

nels". As in radio communications, two MIDI instruments connected together will only be able to commu-

nicate if the transmitter and receiver instruments are using the same channel: in our case, the transmit-

ter is the master instrument and the receiver is the CM-100.

First connect the MIDI OUT connector of your master instrument (organ, keyboard or computer) to the

CM-100's MIDI IN data input port. Use good quality MIDI cables no more than 15 metres long.

Once the connection has been made, the two instruments have to be "tuned" to the same MIDI channel

so that the data exchange can take place correctly.