Accupipe Wicks CM-100 Quick Reference Manual - Warnings
WICKS
CM-100
Pipe Organ Module
Page 2
ENGLISH
Switching on and off
When switching the module on and off, make sure that the audio amplification system is switched off first:
this will prevent signal peaks which may damage speaker components and people's hearing.
Connecting and preventing interference
For the connections to your sound system, see sections 1.3 and 1.4
Use quality cables and remember to check their condition regularly. Do not install too close to radio
equipment, cell-phones, or devices which may generate interference. Also check that the installation site
is not subject to industrial interference, strong RFI or power blackouts.
Protection and maintenance
When transporting the instrument, protect it by using the original packaging or a suitably padded bag.
Avoid prolonged exposure to direct sunlight, intense heat sources, strong vibrations and especially damp
or dusty environments or rain, since they may cause malfunctions, deterioration and even electric
shocks.
If the instrument is to be unused for some time, protect it from dust and disconnect the power supply
cable. Any dust which does collect on the module can be removed "dry" by using a soft cloth or a brush.
Never use methylated spirits, acetone or solvents of any kind.
In case of malfunction
All the settings which can be made by the user are easily accessible on the outside of the instrument.
The instrument has no internal parts which may be replaced or adjusted in any way by customers. In
case of malfunction, contact only an authorised service centre.
Notes about the instruction manual
Read all the information provided in this manual carefully. You will avoid wasting time and will obtain the
best performance from your instrument. Some illustrations and display pages are purely guideline and
may differ from the model you have purchased.
While the instrument's essential characteristics remain the same, the manufacturer reserves the right to
make any modifications to parts, details or accessories considered appropriate to improve the product or
for requirements of a construction or commercial nature, at any time and without undertaking to update
this publication immediately.
Disclaimer
The manufacturer and its authorised dealers do not accept any liability with regard to the use or application of the products
described in this documentation, and cannot be held responsible for any damage incurred by the client further to improper use
of, or modifications to, the instrument.
Any references to names, products and companies are for the sole purpose of illustrating the use of the products described
herein. Any names, logos and brands referred to belong to their respective owners.
© 2005. All rights reserved; the reproduction of any part of this manual, in any form, without the manufacturer's specific written
permission is forbidden.