Accupipe Wicks CM-100 Quick Reference Manual - page 18
WICKS
CM-100
Pipe Organ Module
Page 14
ENGLISH
Once the settings have been made, press
EXIT
to return to the MIDI menu: the settings will automatical-
ly be saved, and will be retained even if the instrument is switched off. From the MIDI menu, you may
return to the main page by pressing
EXIT twice
.
3.4. Setting the MIDI Reception Channel in SPLIT Mode
3.4. Setting the MIDI Reception Channel in SPLIT Mode
Press the
WHOLE/SPLIT
key to enable the multi-channel mode: when it is enabled, the LED of the key
is constantly on.
The procedure for setting the reception channels is similar to that described in point 3.3: from the main
page, press the
SETUP
key
Then use the cursor keys to select the
MIDI menu
(the menu option is selected when it is flashing) and
press ENTER
Using the cursor keys, select the
SPLIT MODE
option and press ENTER
The video page contains the names of all the stops, in accordance with the instrument's current setup,
followed by the value of the midi channel associated to each of them. With the usual procedure, use the
CURSOR
keys to select the value to be changed, and then modify it using the
encoder
.
Note that:
When a stop is selected for modification, both its value on the display and the light in the rocker
Tab switch on the panel flash
A stop can be selected for modification by pressing its key directly on the panel.
Illumination of the LEDs of the [
S
] and [
T
] buttons indicates the availability of a video page before
or after the one currently displayed, respectively. Press the relative button to select it.
Once the settings have been made, simply press
EXIT
to return to the MIDI menu: the settings made will
automatically be enabled and saved. Then press EXIT to return to the SETUP video page, which can be
exited by pressing the same key.
3.5 Additional notes
As you can see from the setting video pages examined in this section, the CM100 offers additional MIDI
communication setting options, apart from setting of the reception channel.
You will find descriptions of all these additional functions, including a handy procedure for acquiring remo-
te commands for switching stops on and off, in the advanced manual.
[TREMULANT] [REVERB] [MIDI]
[OUTS CTRL]
[FINISH] [EXP. PEDAL]
LCD contrast: 6
[WHOLE MODE]
[SPLIT MODE]
[FILTERS]
[BULK DUMP] [CAPTURE VOICE ID]
Ctrbomb32> 1
Bombard16> 1
Bombarde8> 1
Schawm4
> 1
Waldhrn16> 1
Cornopea8> 2