Acer Ferrari 1000 Series Service Manual - page 103
93
Chapter 4
4-1-1-1
C0H
Try to boot with INT 19.
•
Check the HDD.
•
Check the floppy disk drive(s).
•
Check the main board.
4-2-1-1
D0H
Interrupt handler error.
•
Treat as an expansion card problem.
•
Check the main board.
4-2-1-3
D2h
Unknown interrupt.
•
Treat as an expansion card problem.
•
Check the main board.
4-2-2-1
D4h
Pending interrupt error.
•
Treat as an expansion card problem.
•
Check the main board.
4-2-2-3
D6h
Initialize option ROM
error.
•
Check the main board.
4-2-3-1
D8h
Shutdown error.
•
Check the main board.
4-2-3-3
DAh
Extended Block Move.
•
Check the main board.
4-2-4-1
DCh
Shutdown error.
•
Check the main board.
4-2-4-3
DEh
Keyboard controller
failure.
•
Check the keyboard.
•
Check the keyboard controller.
•
Check the main board.
4-3-1-3
E2h
Initialize the chipset.
•
Check the main board.
4-3-1-4
E3h
Initialized refresh
counter.
•
Check the main board.
4-3-2-1
E4h
Check for Forced Flash.
•
Check the main board.
4-3-2-2
E5h
Check HW status of ROM.
•
Check the main board.
4-3-2-3
E6h
BIOS ROM is OK.
•
Check the main board.
4-3-2-4
E7h
Do a complete RAM test.
•
Check the system memory.
•
Check the main board.
4-3-3-1
E8h
Do OEM initialization.
•
Check the main board.
4-3-3-2
E9h
Initialize interrupt
controller.
•
Treat as an expansion card problem.
•
Check the main board.
4-3-3-3
EAh
Read in bootstrap code.
•
Check the HDD.
•
Check the floppy disk drive.
•
Check the main board.
4-3-3-4
EBh
Initialize all vectors.
•
Treat as an expansion card problem.
•
Check the main board.
4-3-4-1
ECh
Boot the Flash program.
•
Check the main board.
4-3-4-2
EDh
Initialize the boot device.
•
Check the HDD.
•
Check the floppy disk drive(s).
•
Check the main board.
4-3-4-3
EEh
Boot code was read OK.
•
Check the HDD.
•
Check the floppy disk drive(s).
•
Check the main board.
Beep Code
Post Code
Description
What to Check (Recommended)