Operating and installation manual for models 10, 15, 25 & 35. The thermal equalizer airius operating manual 12/10/06 11:40 page 1.
Operating and installation manual 1. Technical information 2. Warranty and refurbish program 3. Exploded view of the airius system® 4. General installation and operating guidelines 5. Hanging the the airius system 6. Placement of the airius system 7. Suspended ceiling kit assembly instructions 8. Sa...
Model number - serial number - manufacture information electrical information hazard information is located on labels at the exaust end of the appliance (the motor is thermally protected) model no.@120 vac = motor part no. Hertz wattage rpm model 35 (10.7m) = fp-108 hh (xs b) - 50/60 hz 65/76w - 210...
3. Exploded view the above graphic contains all the descriptions/components of the airius system models 10, 15, 25, 35 note: all screw sizes are english thread with torx® heads english sized hex wrenchs can be substituted to operate screws 4. Installation/operating guidelines power cord the power co...
Outlet - 120 vac, 230 vac and 277 vac power outlets (female connectors) to supply power to the airius system should always be installed by a qualified electrician or similarly qualified person in accordance with national and local electrical codes. The airius system use very little amperage (less th...
Always hold the airius system unit by the bail/crosspiece to avoid injury from moving parts. To confirm electrical continuity, if possible, plug the airius system into a energized outlet, similar to the outlet installed in the ceiling, on the ground before permanently mounting the airius system in t...
Power cord. The following graphic is an example of the typical airius system: the airius system hanging/mounting guidelines 6. Placement of the airius system the airius system performs best when installed such that the air stream/exhaust from the nozzle is unimpeded to the floor. This will insure ma...
Machinery - machinery and work processes that are sensitive to temperature change will operate much more efficiently when the airius system is operating. The flow of air should be directed to a place that will allow circulation but not interfere with the production process. People - most people are ...
8. The airius system safety information and warning! Each airius system has a polarized/grounded plug to reduce the risk of electrical shock (not fitted on units sent to europe/middle east - see wiring instructions). This plug can only fit into the designed polarized/grounded outlet one way. If the ...
The motor is thermally protected; overheating (230f/110c) will cause the motor to stop operating. The motor may restart once normal operating temperatures (195f/90c) are achieved. If motor fails to restart: • disconnect motor from electric source and contact manufacturer or its agent do not postion ...
• do not use petroleum products, thinners, solvents, ammonias, alcohols, or other chemicals, to clean any part of the airius system the performance and results of the airius system® system are subject to many variables such as, but not limited to, the interior environment, exterior environment, cond...
