Airius System 10 Operating And Installation Manual - page 4
3. EXPLODED VIEW
The above graphic contains all the descriptions/components of the AIRIUS SYSTEM
models 10, 15, 25, 35
Note: ALL SCREW SIZES ARE ENGLISH THREAD with TORX® HEADS
ENGLISH SIZED HEX WRENCHS CAN BE SUBSTITUTED TO OPERATE SCREWS
4. INSTALLATION/OPERATING GUIDELINES
POWER CORD
The power cord is a 3 wire 18 AWG (or 16AWG) 300 VAC rated electrical cord
UL rated in North America (NA) as SJT or for CE/EU compliance rated as HO5VV
The three wires in the power cord are color coded to insure proper wiring as follows:
BLACK or BROWN = HOT/ELECTRIFIED/LIVE
WHITE or BLUE = “N” NEUTRAL/RETURN PATH
GREEN or YELLOW-GREEN = GROUND/EARTH
The cord is attached to the Fan Motor via two power leads with insulated
1/4
“ quick
connects.
UNMARKED motor lead - HOT/LIVE
MARKED “N” motor lead - NEUTRAL
GROUND/EARTH is attached to a boss on the outside of the motor housing with a Star
Ring # 10 Terminal and 8-32 x
1/4
“ machine screw.
The Cord is secured in the housing by a strain relief and knotted inside the housing for
additional security.
Voltages - 120 VAC, 230 VAC, 277VAC. Total Height 22” (55.88cm) Width 13” (33.02 cm) Total Weight = 12lb (5.4k)
1/4
- 20 x 1
1/4
Eye Bolt
1/4
- 20 Nut
1/4
-
5/8
Washer
1/4 -
20 Nylock Nut
Bail / Crosspiece (PC/ABS)
1/4
- 20 x 1 T-30 Torx (5/32 Hex)
Pan Head Machine Screw x 2EA
Hole for Strain Relief*
Supporting Power Cord
Cowl (PC/ABS)
Fan Blade Rated 5VA 1 EA
8 - 32 x
3/8
T - 20 Torx (7/64 Hex)
Pan Head Machine Screw 4 EA
Rotar Housing - Fan Motor 120 or 230 VAC
Thermally Protected (277 VAC Available)
Stator (ABS)
8 - 32 x
1/4
T - 20 Torx (7/64 Hex)
Pan Head Grounding Machine Screw x 1EA
10 - 32 x 1
1/4
T - 25 Torx (1/8 Hex)
Pan Head Machine Screw x 4EA
Nozzle (PC/ABS)
Airius Operating Manual 12/10/06 11:40 Page 4