Airone PARSIFAL INOX 120 Instruction Manual - Control Functions
CONTROL FUNCTIONS
REMOTO CONTROL
BUTTON “A”
With suction motor turned on, every time the button is pressed
the motor speed will be reduced of one step.
BUTTON “B”
With the downdraft extracted from 20 to 50 cm, the suction motor
can be turned on and/or off.
KIT LED: With the downdraft extracted from 20 to 50 cm, the
lights can be turned on and/or off.
BUTTON “C”
With suction motor turned on, every time the button is pressed
the motor speed will be increased of one step.
BUTTON "D"
By pressing the button once, the downdraft is of 20cm extracted.
By pressing the button one more time the downdraft is complete-
ly extracted.
If the button is pressed while the downdraft is moving, the
downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or
"E".
BUTTON “E”
By pressing the button once, the downdraft returns in complete-
ly.
If the button is pressed while the downdraft is moving, the
downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or
"E".
If the button is pressed when the suction motor is on, the motor automatically turns off.
NOTES:
- At first use it is necessary to start the remote control learning.
When the downdraft is turned off, keep
button "F" pressed for a long time.
The remote control learning is indicated
with the flashing led.
If, within one minute there is a valid remote
control code (sent by pressing any button
of the remote control), the led will be on
continuously for 3 seconds and then it will
turn off, indicating the proper learning.
F