Airone PARSIFAL INOX 120 Instruction Manual - page 9
USE AND MAINTENANCE
Before beginning any sort of cleaning and maintenance work, turn off the power of the downdraft by
turning the main switch to 0 (OFF).
Cleaning the metal filters
The metal filters fitted in the downdraft should be washed
every 2-3 months depending on how much they are used,
using hot water and a non aggressive liquid detergent.
To access the metal filters, you must remove the cover from
the downdraft. In order to remove the cover, take the cover out
from the downdraft and take off the cover lifting it upwards.
The metal filters can be removed using the special handle
unhooking first the filter in the front part and pulling up.
After washing the filters, they must be thoroughly dried and
reassembled correctly.
Carbon filters
If the downdraft is used with the internal recycle filtering
system, then active carbon filters must be used.
The active carbon in the filters traps the cooking smells.
Warning: The carbon filters can not be reused or washed and
should be changed periodically (every 4 months if the hood is
used for two hours every day). Saturated filters cause fire
hazards.
The carbon filters are placed underneath the metal filters.
For replacement, first remove the metal filters and then
remove the carbon filters by using the handle of the filter and
pushing it towards the back. Then remove it by pulling
upwards.
Cleaning the hood
If the downdraft is stainless steel, use specific products and rags for satin stainless steel (non-
abrasive and / or corrosive detergents free of chlorine), ensuring to clean in the same direction as
the satin finish.
Do not use aggressive products, chemical solvents or derivatives of oil distillates that could leave oily
traces which could cause oxidation and polymerization.
The manufacturer is not responsible for damage to the surface of the downdraft due to failure
to respect these instructions.