Antari X FOGGER User Manual - page 8
Cleaning your fog machine regularly will help reduce costly
parts replacement and repair charges.
Performance
Notes
! Set the volume to "Nonstop Burst" to have continuous
output. When in such setting, the thermostat keep detecting
heater temperature and adjust output automatically.
! All fog machines have a recycling period after long bursts
when the machine will shut itself down for a short period in
order to heat up again. During this time, no fog can be
produced.
! All fog machines may sputter small amounts of fog
occasionally during operation and for a minute or so after
being turned off.
! All fog machines have a recycling period after long bursts
when the machine will shut itself down for a short period in
order to heat up again. During this time, no fog can be
produced.
Please read and save these instructions
Specifications
MODELS
X-510
X-515
X-530
POWER
HEATER
OUTPUT
HEAT UP TIME
FLUID
CONSUMPTION
RATE
TANK CAPACITY
WEIGHT
DIMENSIONS(mm)
AC100V/120V/230V/240V,
50-60Hz
1,000W
10,000cu.ft/min
12Min
24Min./Liter
(100% Output)
2.5Liter
13kg
L550 W230 H155
1,500W
20,000cu.ft/min
11Min
13Min./Liter
(100% Output)
6Liter
15.5kg
L646 W240 H190
3,000W
40,000cu.ft/min
12Min
6Min./Liter
(100% Output)
6Liter
22.5kg
L700 W260 H228
AC230V/240V,
50-60Hz
OUTPUT PRESSURE
0.686bar
0.49bar
0.175bar