Minuet ii user’s manual manuel de l’utilisateur anwenderhandbuch manuale per l’operatore manual del usuario.
2 the high quality of our products is assured by a continuous process of refinement of their technical features. Therefore, it is possible that your product may differ in some respect from the descriptions contained in this manual. This is not a problem- it is an improvement. All fea- tures, descrip...
3 power/led connections the power supply is an atx12v form factor power supply. It has a single 20-pin main power connector, and a 4-pin +12v power connector for the motherboard. It is backwards compatible to previous atx form factor power supplies. If your motherboard does not support the +12v 4-pi...
Connecting the audio ports locate the internal audio connectors from your motherboard or sound card. Consult your motherboard or sound card manual for the pin-out positions. 1. Microphone signal pin: connect the mic-in connector to this pin. 2. Microphone power: connect the mic-power connector to th...
5 9. To install the internal 3.5" device, find the two mounting prongs on one side of the bay. With one hand holding the device at a 45-degree angle with the bottom side up, align the two screw holes on one side of the device with the prongs and slide the device into the bay. (see picture 7) 10. Fas...
Top panel: minuet ii comes with a vented top panel for maximum cooling capacity. It will help the airflow inside the case maximizing ventilation and cooling. Rear panel: minuet ii comes with vents above the i/o panel. Note: do not install exhausts fans over these vents as they are designed to intake...
Antec, inc. 47900 fremont blvd. Fremont, ca 94538 tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Sydneystraat 33 3047 bp rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 technical support us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 462-2060...
