Audio Analogue Crescendo Owner's Manual - page 10
10
Description of the remote controller - TUNER Functions:
•
STANDBY TUNER: multifunction key: one press of this button switches the mode
between TUNER and USBDAC. Keeping the button pushed for some seconds puts the unit
in stand by mode.
•
SEARCH +:the tuning frequency is increased by one step.
•
SEARCH -:the tuning frequency is decreased by one step.
•
MEMORY+ (NEXT TRACK): multifunction key, the function depends on the mode the unit is
working in: Tuner or USBDAC:
TUNER mode: for the description of this function refer to the front panel description.
USBDAC mode: NEXT TRACK, for the description of this function refer to the front
panel description. (the availability of this function depends on the software player used).
•
MEMORY- (PREV TRACK):multifunction key, the function depends on the mode the unit is
working in: Tuner or USBDAC:
TUNER mode: for the description of this function refers to the front panel description.
USBDAC mode: PREV TRACK, for the description of this function refer to the front
panel description (the availability of this function depends on the software player used).
•
STORE (STOP):multifunction key, the function depends on the mode the unit is working
in: Tuner or USBDAC:
TUNER mode: for the description of this function refer to the front panel description.
USBDAC mode:
STOP, for the description of this function refer to the front panel
description (the availability of this function depends on the software player used).
•
SCAN +: the tuning frequency is increased to reach the first radio station which has a higher
frequency than the one it started from; if this is not possible a complete scansion of the
band is carried out and the present frequency is tuned again by just pressing the button.
•
SCAN -: the tuning frequency is decreased to reach the first radio station which is has a lower
frequency than the one it started from; if this is not possible a complete scansion of the
band is carried out and the present frequency is tuned again by pressing the button.
•
AM/FM (PLAY): multifunction key, the function depends on the mode the unit is working
in: Tuner or USBDAC:
TUNER mode: it permits you to commute from AM and FM.
USBDAC mode: ►
PLAY/PAUSE, for the description of this function refer to the
front panel description (the availability of this function depends on the software player
used).
•
MONO: Pressing this button forces the unit into monophonic playback. When this option is
enabled, the letter “S” (Stereo) isn’t shown on the display. To return to normal mode, just
press this button once. When the unit is in stereophonic mode, the letter “S” is shown on
the display when the incoming signal is stereophonic.