Audio Analogue MAESTRO DUECENTO Owner's Manual - page 6
6
1
2
3
Front panel
1.
STAND-BY BUTTON It’s located under the front panel. Pushed for 3 seconds turns on the amplifier. Pushed again shut it
off immediately.
2.
STATUS LED This LED is “low intensity red” when the left amplifier is off. It’s “bright red” when the left power amplifier is
turning on. It’s green when the left power amplifier is operating and “blinking red” is there is a problem.
3.
STATUS LED This LED is “low intensity red” when the right amplifier is off. It’s “bright red” when the right power amplifier is
turning on. It’s green when the right power amplifier is operating and “blinking red” is there is a problem.
Pannello frontale
1.
STAND-BY BUTTON E’ posizionato sotto lo chassis frontale. L’amplificatore si accende tenendolo premuto per circa 3
secondi. Premendolo nuovamente l’amplificatore si spegne.
2.
LED DI STATO Questo LED serve ad indicare lo stato dell’amplificatore sinistro. Se l’amplificatore sinistro è spento il LED è
illuminato debolmente di rosso. Quando l’amplificatore sinistro si sta accendendo si illumina di rosso intenso e diventa verde
durante il funzionamento normale. Se ci sono dei problemi l’amplificatore sinistro viene spento ed il LED lampeggia rosso.
3.
LED DI STATO Questo LED serve ad indicare lo stato dell’amplificatore destro. Se l’amplificatore destr è spento il LED è
illuminato debolmente di rosso. Quando l’amplificatore destro si sta accendendo si illumina di rosso intenso e diventa verde
durante il funzionamento normale. Se ci sono dei problemi l’amplificatore destro viene spento ed il LED lampeggia rosso.