- DL manuals
- Audio Authority
- Amplifier
- 1392D
- User Manual
Audio Authority 1392D User Manual
Summary of 1392D
Page 1
User manual ultra hd 4k video distribution amplifier ® model 1398d • model 1394d • model 1392d.
Page 2: Table of Contents
2 table of contents introduction 4 checking package contents 4 getting the best results 5 planning a distribution system 6 installation 7 troubleshooting 9 specifications 10 limited warranty 11 regulatory compliance 11 contact information 11 ultra hd 4k video distribution amplifier ® model 1398d • m...
Page 3: Introduction
3 introduction thanks for purchasing an ultra hd distribution amplifier from audio authority. The 1398d, 1394d, and 1392d are designed to split an ultra hd or 4k hdmi ® signal from one source to a wide spectrum of hdmi displays in retail demo environments this family of products is the ideal solutio...
Page 4: Getting The Best Results
4 getting the best results many factors influence the quality and reliability of hdmi signal distribution installations the following are the main factors to consider, and basic precautions that will ensure the best possible performance ● sys-rst for source switching - if the source device will be s...
Page 5: 1398D
5 planning a distribution system ● each display should be tested with the source(s) being used to ensure basic compatibility before connecting them to a distribution amp and/or switcher. Not all hdmi components and displays are compatible ● since all of the displays will be receiving the same video ...
Page 6: Installation
6 installation study the drawing below and become familiar with the controls, signal input, outputs and power input the 1398d is shown below, the differences between it and the 1394d and 1392d are the number of hdmi outputs available output 4 output 3 output 2 output 1 output 8 output 7 output 6 out...
Page 7: Operation
7 wiring the system ● switch off all devices, including monitors. ● connect a premium certified high speed cable from the hdmi source to the input of the da. Cable lengths should be kept as short as possible. ● connect the outputs of the da to displays or other devices. ● make certain that the hdmi ...
Page 8: Firmware Updates
8 switch settings ● edid: choose standard (std) or tv mode. In tv mode, the da automatically detects and stores the output 1 sink edid data (e.G. A tv). Switch to std mode for 1080p output ● sys-rst: the da checks the edid of connected displays every eight to ten minutes. Set the sys-rst switch to o...
Page 9: Specifications
9 specifications model 1392d 1x2 distribution amplifier (splitter) model 1394d 1x4 distribution amplifier (splitter) model 1398d 1x8 distribution amplifier (splitter) hdmi features hdmi, 3d & 4k/2k dvi compliance dvi 1.0 hdcp compliance hdcp 2 2 video bandwidth single-link 600mhz (18gbps) maximum vi...
Page 10: Limited Warranty
10 limited warranty if this audio authority ® product fails due to defects in materials or workmanship within one year from the date of the original sale to the end-user, audio authority will replace or repair the defective product at no cost freight charges for the replacement unit will be paid by ...
Page 11: Regulatory Compliance
11 regulatory compliance model 1392d, 1394d, and 1398d distribution amplifiers have been tested for compliance with appropriate fcc and ce rules and regulations and are also rohs compliant the power adaptor has been tested for compliance with ul, ce and csa rules and regulations and is also rohs com...
Page 12
E-137b rev 20180122 2048 mercer road, lexington, ky 40511-1071 usa 800-322-8346 • 859-233-4599 • fax: 859-233-4510 support@audioauthority com • www audioauthority com.