Audio Authority 1392D User Manual - 1398D
5
Planning a Distribution System
● Each display should be tested with the source(s) being used to ensure basic
compatibility before connecting them to a distribution amp and/or switcher.
Not all HDMI components and displays are compatible
● Since all of the displays will be receiving the same video signal resolution
and format from the source, make sure the source is set to output the highest
resolution that all of the displays can accept
. For instance, if one of the
displays connected to the distribution system can only accept a maximum
input resolution of 1080p, all of the displays will receive only 1080p video
signals You may consider creating two or three separate distribution systems
with different sources and different output resolutions so that you can
adequately demonstrate the highest resolution HDTV sets.
● Since HDMI connectors can sometimes become loose, mount the switcher
or distribution amplifier to a flat surface and add strain relief tie-downs a few
inches away from every HDMI cable connector
1398D
UHD PLAYER
1398D
Eight UHD TVs on display
PREMIUM CERTIFIED
HIGH SPEED HDMI
CABLES