Audio Authority 1392D User Manual - Operation
7
Wiring the System
● Switch off all devices, including monitors.
● Connect a premium certified high speed cable from the HDMI source to the
input of the DA. Cable lengths should be kept as short as possible.
● Connect the outputs of the DA to displays or other devices.
● Make certain that the HDMI cables are securely plugged into the source and
display devices as well as the DA. Always use premium certified high speed
cables, and the shortest length possible, for best results
● Connect the power adapter to the AC source and then to the DA.
● The unit begins to function as soon as the AC adapter is connected to the unit
and AC power. There is no power switch.
● Turn on the HDMI source and HDMI destination devices and observe the
source signal on the inputs of all of the destination devices
Note: Proper operation of HDMI distribution amplifiers depends on the use
of premium certified high speed HDMI cables with low loss, high bandwidth
signal handling capabilities.
Operation
Supported Resolutions:
DVI and HDMI Resolutions
Input
Output
640x480@60/72/75/85
800x600@56/60/72/75/85
1024x768@60/70/75/85
1280x1024@60
1366x768@60
1600x1200@60
1920x1080@60
1920x1200@60
1440x576i@50
1440x480i@59.94/60
720x480p@59.94/60
720x576p@50
1280x720p@50/59.94/60
1920x1080i@50/59.94/60
1920x1080p@23.97/24/25/29.97/30/50/59.94/60
3840x2160@24/25/30/50/60
4096x2160@24/25/30/50/60