Audio Authority ADX-0808 Installation And Operation Manual - page 10
10
Operation
Front Panel
The front panel is operated by touching the sensitive key areas: Group , Favorite , All , Menu , Back , and Dim
to select the respective sub-menu. Once the desired screen has been selected, rotate the Multi Function Knob to navigate
to the item you want to change and press the knob to select that item. The previous selection is marked with a solid arrow “”,
and any others marked with an open arrow “.”
Zone/Source Selection Screen
This default screen performs zone/source switching. Rotating the knob while selecting the zone line selects a different zone.
Once the zone to be switched is selected, push the knob to move to the source selection line. Rotating the knob here allows a
new source to be selected for that zone. Press the knob to activate your selection.
Group Button > Group Selection Screen
This screen allows switching multiple output zones to a single input source through ten predefined groups. Rotate the knob
while on the group selection line to choose the group. Push the knob to move the cursor to the source selection line. Rotate
the knob on the source selection line to select the source. Finally, push the knob to save the group of zones to the selected
source.
Group Switching
The ADX is capable of storing up to 10 Groups of Zones. Each Group may be assigned a unique name up to 16 characters in
length. Groups can only be configured and named using Serial commands. See Appendix A for the appropriate Group com-
mands.
Press the Group button, select the previously assigned Group number by rotating the knob until the desired Group is shown
and press the knob. Rotate the knob to select the desired Source.
Favorite Button > Favorite Selection Screen
This screen allows switching multiple output zones to multiple sources through ten predefined favorites. Rotate the knob to
select a favorite, and push the knob to activate that favorite selection.
Favorite Switching
The ADX is capable of storing up to 10 Favorites of Source/Zone combinations. Each Favorite may be assigned a unique
name up to 16 characters in length. Favorites can only be configured and named using Serial commands. See Appendix A for
the appropriate Favorite commands.
Press the Favorite button, select the previously assigned Favorite number by rotating the knob until the desired Favorite is
shown and press the knob.
All Button > All Selection Screen
This screen allows switching all output zones to a single source. Rotate the knob to select a source, and push the knob to
activate the selection.
Back Button
Pressing this button will return you to the previous screen.
E
F
G
H
I
J
D
E
F
G
I