B-Tech Quintro + User Manual - Questions & Answers
10
HOW TO RECORD BETWEEN TWO
VCR’s:
1. Connect two VCR’s respectively to
“SCART 1” and “SCART 2”
sockets. Recording can be done bi-
directionally between two VCR’s.
2. To record from the second VCR
connected to the ”SCART“2” input,
select “2” and press the LOCK key
once.
Output lamps will change to red or
orange.
To record from the primary VCR con-
nected to “SCART 1”, select “1”,
press the LOCK key once and make
sure the TV2 button is released. TV2
and “1” In/Out lamps change to red or
orange.
3. Select the AV channel and depress
the RECORD key on the destination
VCR.
4. Depress the PLAY key on the
source VCR. Recording will start.
HOW TO OBTAIN HI-FI
STEREO SOUND:
Connect a Hi-Fi system to theHI-FI
Output on the rear panel of the
“QUINTRO+”, to obtain excellent Hi-Fi
stereo sound through your Hi-Fi system
from any input.
QUESTIONS & ANSWERS
1. I cannot release the LOCK
function?
You have to select the locked input
again before you can release the
LOCK function, i.e., all lamps in
orange.
2. I cannot watch terrestrial TV while
recording video from other input?
Make sure your TV is not on the AV
channel. If it is, switch it out of the
AV channel.
3. I want to monitor the recording?
You have to select the input being
recorded fromand select the AV
channel on your TV, i.e., all lamps
turn orange.
If you are watching via the Phono
connection on TV2, simply release
the TV2 button on the
“QUINTRO+”.