B-Tech Quintro + User Manual - Lock Function:
8
2. LOCK -
Depress the LOCK button to lock
the selected input to “SCART 1”
and the “TV2” Phono sockets for
uninterrupted recording or watching.
i.e., another TV may be connected
to the “TV2” Phono sockets.
3. TV2-
To select the output video.
Button released = Output
video as that on the Scart
connector “1”.
Button depressed = Output
video as on the Scart
connector “TV”.
LOCK FUNCTION:
To prevent recording or watching on
TV2 from accidental interruption, you
can lock the selected input:
1. Select your desired input, of which
the lamp will turn on in green.
2. Depress once the LOCK key. All
lamps will turn from green to
orange.
3. When the LOCK function is on, you
may select other input. The lamp of
the newly selected input will turn on
in green. The lamps of the locked
input and the VCR output will
change from orange to red.
MANUAL SWITCHING (continued)
Depending on the setting of
the TV2 button, the TV2 lamp
will change from orange to
either red or green.
4. To release the LOCK function or to
select another input for recording:
i.
Select the locked input again, all
lamps change to orange.
ii.
Depress the LOCK key once and
the LOCK function will be released.
All lamps will change from orange
to green.
iii. To select another input for
recording, select your desired input
and repeat steps 1 and 2.
HOW TO RECORD:
1. On your VCR, select the AV or
RGB channel.
2. Switch on the equipment, from
which, the video is to be recorded.
If digital TV is to be recorded, you
should select your desired channel
on the digital TV receiver.
3. Make sure the correct input on the
“QUINTRO+” is selected.
The lamp of the selected input will
turn on in green.