BabyLove BL620A 2010 Instruction Book - page 24
A. Engage the brakes.
B. Press both buttons on the side of the
handle. Then continue to rotate the handle
slightly forwards and then release. Rotate
the handle up over the canopy. Check the
handle is locked in the upright position.
C. To release the Carrier from the stroller,
locate the release lever on the back (head
end)oftheCarrier.Squeezeupandhold
in to release the retaining locks. Lift the
Carrier up by the handle and remove from
the stroller.
46
47
TRAVEL SYSTEM-USE WITH STROLLER
REMOVING THE CARRIER FROM THE STROLLER
INSTALLATION OF CAR ANCHOR FITTING
Consultthevehicleowner’shandbookforlocationofanchoragefittingsor
anchorage points and the possible use of spacers. Some vehicles may have an
anchorfittingfittedbythevehiclemanufacturer.Ifanchoragepointscannotbefound
refertocarmanufacturerorlocalchildrestraintfittingstationortrafficauthorityfor
optimum position of anchorage point and the use of spacers.
UPPER ANCHORAGE STRAP
IMPORTANT:
THE ATTACHMENT CLIP COVER MUST ALWAYS BE USED AS IT PREVENTS THE
RISK OF INCORRECT FITMENT OF THE ATTACHMENT CLIP TO THE ANCHOR
FITTING. ALWAYS ENSURE THAT THE ATTACHMENT CLIP IS CORRECTLY
ENGAGED TO THE ANCHOR FITTING AND NOT HOOKED OR FITTED TO ANY
OTHER OBJECT BEFORE EACH USE OF THE RESTRAINT. THIS IS ESPECIALLY
IMPORTANT IN VEHICLES SUCH AS STATION WAGONS, VANS, HATCH BACKS
OR VEHICLES WITHOUT A FIXED PARCEL SHELF, SINCE THE ANCHOR POINT IS
USUALLY NOT VISIBLE.
IMPORTANT INSTALLATION NOTE:
Insomevehiclestheanchorfittingintherearverticalpanelcanonlybeinstalledin
oneway.Pleaserefertovehicleowner’shandbookorachildrestraintfittingstation
for correct method.