Babyviewer RA-4500 User Manual - User Manual
user manual
13
Babyviewer RA-4500
Press the Talk button
24
on the parent unit and hold it pressed.
• Hold the parent unit vertical with the microphone approximately 10 cm from your mouth, and speak
into the microphone.
• Release button
24
when you have finished talking.
Playing a lullaby
There are 5 pre-programmed lullabies that you can play on the baby unit.
• To play the currently selected lullaby or stop playback, press the music button
18
on the
baby unit.
• To select a different lullaby, repeatedly press the up button
16
or down button
17
until the
desired lullaby is selected. The lullaby icon will display the selected lullaby (1 to 5).
• Press the on/off button
25
when the desired lullaby is selected.
Switching the night light on and off
• Press the menu button
23
5 times. The night light icon is displayed.
• Press the up
16
or down button
17
to switch the night light “ON” (night light is on) or “OFF”.
• Press the menu button
23
to confirm.
• After 10 seconds the parent unit will switch back to monitor mode.
Voice activated transmission (VOX)
During night and to save energy, the RA-4500 can be set in VOX mode.
In VOX mode, the display will be activated as soon as the microphone of the baby unit will capture
sound. You can set the sound detection sensitivity (VOX) of the babyphone. If the sensitivity is set to
high, the baby unit will pick up weaker sounds.
• Press button
23
6 times. “VOX” is displayed.
• Repeatedly press button
16
or
17
to set the VOX sensitivity.
The VOX sensitivity is indicated by a black bar on the display:
high sensitivity
low sensitivity
• To switch off VOX mode, select “OFF”.
• Press the menu button to confirm.
RA-4500_usermanual Jan 2014.indd 13
21/01/2014 11:53 am