Back to Basics BLENDER EXPRESS BPE3 Instruction Manual - page 4

Blender Express Parts 

Additional Accessories sold with the Blender 

Express Plus 

4

Mug Mug 18 

oz. 

Blending 

Container 

Blade 

Base 

Motor 

Base 

Mug Lid 

Blade 

Base 

Mug Lid 

12 oz. 

Blending 

Container 

Drinking 

Rims 

The Blender Express

™ 

mug has convenient measuring marks to create perfect 

smoothies and frozen drinks.  To make your favorite drink, follow these simple steps: 

TO MIX: 

1.  ADD ICE – Add ice or frozen ingredients until the total level reaches the 

FROZEN INGREDIENTS line on the side of the mug.  Frozen ingredients 

include ice, frozen fruit, frozen yogurt, ice cream, etc. 

2.  ADD LIQUIDS – Add any combination of liquid ingredients up to the 

LIQUIDS 

mark on the side of the mug.  Liquids include any soft ingredients such as fruit, 

milk, fruit juice, herbal supplements, or yogurt in any combination you think 

would be tasty.  

3.  Place the blade base on the mug and turn clockwise to tighten. 

4.  With the blade base firmly attached to the mug, flip the mug over and secure the 

blade base onto the motor base by turning the mug clockwise. 

Note:  The Blender Express

™ 

includes a small, clear gasket inside the rim of the 

blade base as well as a travel lid.  The gasket provides an effective seal 

between the mug and the blade base or lid.  These gaskets DO NOT need to be 

removed.  If the clear gasket becomes dislodged from the blender base or lid, 

replace by setting the gasket flat onto the circular slot inside the perimeter of the 

blade base (blade side up) or the lid.  Holding the blade base (blade side up) or 

lid with both hands, use your thumbs to lightly push the gasket down into the 

circular slot of the base perimeter until it is firmly in place.  Screw the mug onto 

the blade base or lid to ensure the gasket is seated properly.   

5.  Pulse the mixture 2 or 3 times by turning the dial to “PULSE.”