Balboa bba 2 Installation Manual - page 16
42296-D, bba2 Manual
© 2017 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
16
Page
Bluetooth Connection
(Topside panels with “Menu” GUI)
1 - Power up the system pack with bba2
already connected to the system pack.
2 - On the topside panel select the “A / V”.
3 - Turn on Bluetooth
function of your smart
device or music device.
4 - On your smart device or music device,
click search for Bluetooth device. Make sure
you are close enough to the spa tub.
5 - Select “PPME70BT” from the pairing list.
6 - Click “Connect.” Once connected, you
can now play your favorite music from your
smart device or music device.
“BT Connected” appears on the topside
panel display.
bba2 operates up to 100 feet in open air.
Ranges vary as they are dependant
on installations.
2A - Select “A / V” on the
topside panel.
2B - Select “Power.”
“Discoverable” may appear.
2C - Next, “BT Not
Connected” appears.
Refer to step 6 below.
Topside Panel Options
Topside Panel: spaTouch 1
(software version 2.8 or above)
Topside Panel: TP800
(software version 4.11 or above)
Topside Panel: TP900