Balboa bba 2 Installation Manual - page 6
42296-D, bba2 Manual
© 2017 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
6
Page
bba
™
2 Mounting Instructions
1 - Choose a well ventilated mounting surface. The bba2
amplifier generates significant heat when operating at
high power levels.
2 - To insure a good Bluetooth connection, the mounting
surface should be elevated from the ground.
3 - It is preferable to mount bba2 such that the heat sink
fins are vertical or facing upward.
4 - Drill pilot holes in the mounting surface that
correspond with the 2 mounting holes in the bba2
amplifier. Be sure not to drill into any critical areas
of the spa.
5 - Fasten the bba2 amplifier to the surface securely with
the mounting screws.
Continue to next page.
Mounting Screws
45mm
9.5mm
Heat Sink Fins
Mounting Holes