Balboa bba 2 Installation Manual - page 5
42296-D, bba2 Manual
© 2017 Balboa Water Group. Single Source Solution. All rights reserved.
1382 Bell Avenue | Tustin, CA 92780 | p 714.384.0384 | www.balboawater.com
We reserve the right to change technical data without further notice.
5
Page
10 11 12
7
8
9
4
5
6
1
2
3
bba
™
2 Amp Connections
Wire the plug/wire bundle to the 12VDC power source,
left and right speakers, and sub woofer. The numbers in
“Plug/Wire Bundle Chart” correspond with the numbers
in “Plug/Wire Bundle Diagram 1” and
“Plug/Wire Bundle Diagram 2.”
Plug/Wire Bundle Diagram 2
or
Plug/Wire Bundle
(6) Blue
(12) Red
(3) Black
(7) White
(4) Gray
(8) White with black stripe
(5) Gray with black stripe
Subwoofer
Normal
Speakers
(10) Green
(11) Green with black stripe
(1) Violet
(2) Violet with black stripe
Wire Color
Wire #
Wire Function
Red
12
B + (+ 12VDC)
Green w/stripe
11
Rear Left Speaker -
Green
10
Rear Left Speaker +
no wire (blank)
9
no wire (blank)
White w/stripe
8
Front Left Speaker -
White
7
Front Left Speaker +
Blue
6
B + (+ 12VDC)
Gray w/stripe
5
Front Right Speaker -
Gray
4
Front Right Speaker +
Black
3
Ground (neg)
Violet w/stripe
2
Rear Right Speaker -
Violet
1
Rear Right Speaker +
Plug/Wire Bundle Chart
This manual only specifies audio connections to a
subwoofer. If the subwoofer needs other connections,
such as power, refer to the subwoofer documentation
for those connections.
Note: only a system with a spaTouch 2 or spaTouch 1
(with an “Icon” graphic user interface) connected can
be configured to use a subwoofer.
If a sub woofer is used, the low pass filter setting needs
to be enabled on the audio settings screen
(see page 12) .
Plug/Wire Bundle Diagram 1
10 11 12
7
8
9
4
5
6
1
2
3
Female Front View (photo)
Female Front View (diagram)
Female Side View (photo)
Female Side View (photo)