Balt ROLZ-2 Assembly Instructions Manual - page 4
Manual is about: Portable AV/Conference Center
of
11
4
Install
1 Slide Spacers (P-17)
and 1
Drawer Slide (E) to Left Side Panel (P-1)
and secure using 2 Wood Screws (A2)
[packaged with slides] as shown
in illustration # 1.
(See Detail on Page 3)
Illustration # 1
Repeat Steps1 through 4 for the
Right Side Panel (P-2).
L
L
B
E
A2
1.
2.
3.
To Assemble:
Identify and Separate all the Parts and Hardware.
Place the Left Side Panel (P-1) with the Predrilled
holes facing up. Attach 1 Slide Spacer (P-17), and
1
Keyboard Slide (B) to Left Side Panel (P-1) and
secure using 2 Wood Screws (A2) as shown in
illustration # 1.
(See Slide Detail on Page 3)
Install 9 each Cam Posts (L) in the 9 threaded insert
nuts (Pre-installed) as shown in illustration # 1.
P-1
P-17
P-17
5.
A2
4.
ROLZ-2
Assembly Diagram