Bang & Olufsen BEOLINK VIDEO User Manual - page 10
10
• If your main Bang & Olufsen system
is in stand-by when you switch it on
via your extra TV, you will only get
sound and pictures on your extra
TV – neither the speakers, nor the
TV screen in your main system will
be cut in.
• If you try to switch on a source in
your main Bang & Olufsen system,
and you get the pictures and/or the
sound from a different source on
your extra TV, it may be because a
recording (audio or video) is
progressing in your main system.
• When you watch a video source
from your main system, for
example a satellite program, you
will get pictures and mono sound
on your extra TV. To obtain pictures
and stereo sound (if any), you must
use the AV button: Switch the
entire system to stand-by; then
press, for example, SAT, AV, SAT.
(To obtain the stereo sound alone,
just press AV, SAT.)
• If, for some reason, you want to
watch a TV program from your
main TV (for example to watch a
decoded program), press LINK then
TV.
• To switch mono/stereo sound on a
radio program; to switch language
on a TV or satellite program; or to
switch sound track on a video tape
– press SHIFT then SOUND
repeatedly.
• To start playback on a Bang &
Olufsen record player in your main
system, press LIST to display PHONO
then GO. Pressing
▲ or ▼ while you
are listening to a record makes the
record player step through the
music in 8 mm steps.
• To start playback on a secondary
Bang & Olufsen audio- or video
tape recorder in your main system,
press SHIFT then A.TAPE or V.TAPE.
• To switch on a DVD or CDV player
connected to your main video
system, press SHIFT then SAT.
>Remote operation
Also nice to know...