Banjo 301PBIW Instruction Manual - Disassembly Instructions:
of
8
2
Disassembly Instructions:
5. Remove impeller (18206) from the wet seal
assembly by pushing the wet seal shaft (18206)
from the back of the assembly.
6. Remove cover plate (18202A) from the wet seal
assembly. It may be necessary to pry the
cover plate away from the reservoir by using the
pry tabs located on the cover plate.
7. Remove the seal assembly (15035) from the
wet seal assembly at this time.
8. Inspect the wear plate (18004) and replace or
repair as necessary.
9. The inlet (18012) and outlet (18008) flanges
and gaskets (18013, 18009) can be inspected
and replaced as necessary.