Banner Q3X Instruction Manual - 4 Specifications
4 Specifications
Sensing Beam
Visible red Class 2 laser, 655 nm
Supply Voltage (Vcc)
10 to 30 V dc
Power and Current, exclusive of load
Supply Power:
Current consumption:
Sensing Range
Model
Contrast Sensing
Range
Background
Suppression
Distance
Q3XTBLD-Q8
0 to 300 mm
(11.81 in)
Not Applicable
Q3XTBLD50-Q8
0 to 50 mm (1.97
in)
60 mm (2.36 in)
Output Configuration
Bipolar (1 PNP & 1 NPN) output
Output Rating
Off-state Leakage Current:
NPN On-state saturation voltage:
1.0 V at 100 mA
PNP On-state saturation voltage:
at 100 mA
Input Wire
Allowable Input Voltage Range: 0 to Vcc
Active Low (internal weak pullup—sinking current): Low
State
Supply Protection Circuitry
Protected against reverse polarity, over-voltage, and transient
voltages
Repeatability
60 µs
Beam Spot Size
Beam Spot Size (FWHM)
2.24 mm
0.79 mm
y
x
1.52 mm
0.55 mm 0.27 mm
0.55 mm
Distance
30 mm
150 mm
300 mm
x
y
Beam
Spot
Pattern
Response Speed
User selectable:
•
—250 microseconds
•
—1 millisecond
•
—5 milliseconds
Delay at Power Up
1 s
Ambient Light Immunity
> 5000 lux
Maximum Torque
Side mounting: 1 N·m (9 in·lbs)
Nose mounting: 10 N·m (88 in·lbs)
Connector
5-pin Euro M12 Integral Connector
Construction
Housing: Nickel-plated zinc die-cast
Side cover: Nickel-plated aluminum
Lens cover: Scratch-resistant PMMA acrylic
Lightpipes and display window: Polysulfone
Adjustment buttons: 316 stainless steel
Vibration
MIL-STD-202G, Method 201A (10 to 60 Hz, 0.06 in (1.52
mm) double amplitude, 2 hours each along X, Y and Z
axes), with sensor operating
Shock
MIL-STD-202G, Method 213B, Condition I (100G 6x along X,
Y and Z axes, 18 total shocks), with sensor operating
Environmental Rating
IEC IP67 per IEC60529
IEC IP68 per IEC60529
IEC IP69K per DIN40050-9
Operating Conditions
Temperature:
−
10 °C to +50 °C (+14 °F to +122 °F)
Humidity: 35% to 95% relative humidity
Storage Temperature
–25 °C to +75 °C (
−
13 °F to +167 °F)
Certifications
Class 2 power
Ind. Cont. Eq.
3TJJ
UL Environmental Rating: Type 1
Class 2 Power supply/source to be
provided with 1A overcurrent
protection device. Power supply could
be current limiting or an 1A external
fuse is required on the power output.
4.1 Performance Curves
Performance is based on a 90% reflectance white test card.
Q3X Laser Contrast Sensor
24
www.bannerengineering.com - Tel: 763.544.3164