Barazza 1PLB0361TX-00 series Installation And Use Manual - Installation Site Choice
9
WAHL DES INSTALLATIONSORTES
Eigenschaften des Installationsraumes
Die Geräte müssen in Innenräumen aufgestellt werden, die
für den Zweck geeignet sind und in denen Temperaturen von
max. 25°C sowie eine Feuchtigkeit von max. 60% herrschen;
sie müssen zudem den Sicherheitsvorschriften im Verwen-
dungsland entsprechen (Sicherheits- und Trennschalter,
geerdete Anlage, Potentialausgleich, usw.). Die Geräte sind
nicht für die Aufstellung im Freien geeignet, dürfen keinen
Witterungseinflüssen ausgesetzt werden. Die Geräte können
auf Möbel montiert werden, die aus hitzebeständigen Ma-
terialien gefertigt sind. Ein in die Arbeitsfläche eingebautes
flächenbündiges Kochfeld, geeignet nur für Naturstein (Granit,
Marmor), Massivholz und Fliesen.
Für Arbeitsoberflächen mit anderen Materialien, kontaktie-
ren Sie den Hersteller, ob das Material für den Einbau eines
flächenbündigen Kochfelds geeignet ist.
In den Aufstellungsräumen
muss ein kontinu-
ierlicher Luftaustausch
für den ständigen Zufluss der
für die Verbrennung des Gas benötigte Luft gemäß der
geltenden Vorschriften UNI – CIG 7129 und 7131 gewähr-
leistet werden. Die Öffnungen mit einem Querschnitt von
mindestens 100 cm
2
müssen so konstruiert sein, dass sie
weder von noch von außen verstopft werden können und
sie müssen sich nah am Boden befinden (
Abb. 2)
. Jede
andere Belüftungsform muss unbedingt den Anforderun-
gen der Norm UNI – CIG 7129 entsprechen.
Dampfablass
Die Gasgeräte müssen die Verbrennungsprodukte über
Schornsteine, Abzugshauben oder Elektrolüfter (UNI – CIG
7129) (
Abb. 2)
mit einer Leistung, die einen stündlichen
Luftaustausch von mindestens 3 mal dem Volumen des
Raumes ermöglicht, direkt ins Freie abführen. Wir erinnern
daran, dass zur Verbrennung 2m
3
/h Luft pro kW Nennwär-
mebelastung benötigt werden (siehe Typenschild für die
Gesamtwärmebelastung).
Abstand von den Wänden neben und hinter dem Apparat
Die Geräte müssen mit einem gewissen Abstand zur
Wand aufgestellt werden (
Abb. 3).
ANMERKUNG:
Immer wenn eine Abzugshaube über dem
Kochfeld angebracht wird, lesen Sie die Montageanleitung
der Abzugshaube, in der der richtige Abstand, der eingehalten
werden muss, aufgeführt wird.
9
werden muss, aufgeführt wird.
AIR
AIR
AIR
2
INSTALLATION SITE CHOICE
Installation site characteristics
The appliances must be placed in suitable interior locations with
a maximum temperature of 25°C and maximum humidity of
60%; the locations must satisfy the safety standards in force in
the country of use (protective isolating switch, earthing system,
equipotential system, etc.). The appliances are not designed
for outdoor use, to be exposed to the elements or bad weather
conditions. Appliances may be assembled onto units made of
heat-resistant materials .
A built-in hob, flush with the worktop, is only suitable with
natural stone (granite, marble), solid wood and tiled bases.
In the instance of bases made from other materials, please ask
the manufacturer whether they are suitable for flush hobs.
Installation locations
must have continuous
air exchange
to provide the air flow necessary for gas
combustion as specified in the standards in force UNI – CIG
7129 and 7131. Openings with an area of at least 100 cm
2
must be constructed in such a way so that they cannot be
obstructed from neither the inside or the outside and they
must be positioned in proximity to the ground (
figure 2)
.
Every other ventilation type must be in accordance with
specifications in the standard UNI – CIG 7129.
Fume discharge outlet
Gas appliances must release the combustion emissions
directly outside via flues, either by using extractor hoods or
electric fans (UNI – CIG 7129) (
figure 2)
with sufficient power
to guarantee hourly air exchange at least 3 times the loca-
tion volume. It is to be noted that 2m
3
/h of air is necessary
for every kW of nominal thermal capacity (consult the data
plate for total thermal capacity).
Distance from side and back walls
The appliances must be kept at a specified distance from
walls (
figure 3)
.
NOTE:
If installing a range hood above the hob be sure
to follow the hood assembly instructions and the correct
mounting height contained therein.
min. 65 cm
min. 45 cm
A= 4 cm
B= 5 cm
40
40
65
65
90
90
120
120
A
B
3