Barco CM50 Installation Manual - Ceiling Mount Cm50
Date : 25/10/95 R9827990-1
Ceiling Mount CM50
R9827990
R9827991
11
Mounting Instructions
Configuration B
Mounting the lock
If the lock holder system is not yet
mounted on the center plate, pro-
ceed with this mounting.
Mount the lock holder system with
four bolts (M4x8) and washers
(16x7.2x4) to the center plate.
Squeeze the arms of the lock holder
system to check the correct function-
ing of the lock.
Mounting of the 3 threaded rods
lock arms
lock
Mounting holes for IRIS800
(Projector 700 series)
front view
The length of the extension rods (X) is determined by
the position of the projector with regard to the ceiling
distance (CD).
The value CD can be calculated with the formula given
in the
Installation Manual of your projector.
Projectors 700 series
The minimum and the maximum length of the rods (X)
is given in mm by these formulas :
Xmin = CD - 50 - 75 + 55
Xmax = CD - 50 - 75 + 90
overshoot
height ceiling support
total height projector support + center plate.
Projectors 3000 series
The minimum and the maximum length of the rods
(X) is given in mm by these formulas :
Xmin = CD - (50+33) - 75 + 55
Xmax = CD - (50+33) - 75 + 90
50
33
total height projector support + center plate+
adapter plate.
overshoot
front view
projector
adapter plate
height ceiling support